1/4" BLUE TAPE

Disclaimer
Colors may vary slightly from actual coating due to variance in colors and monitors. These sample colors are only a very close guide.

$7.11

(lb.) each

Product ID: .25" BLUE

Product is out of stock

Get a notification when items are back in stock

E-mail to a friend Ask a question

1/4" X 72 YDS 1 MIL BLUE MASKING TAPE

Size: 0.25"

High temperature blue polyester tape is ideal for masking irregular or curved surfaces in powder coating environments.

General Information:
Total Thickness: 2.4 mil
Temperature Limit: up to 400°F for intermittent, one-time use
Typical masking uses: Masking for powder coating, electrocoating, fine-line masking, masking on curved surfaces
Typical splicing uses: silicone coated release papers, films and other substrates
Blue in color

Features:
Carrier: 1 mil polyester film
Adhesive: 1.4 mil silicone-based, pressure sensitive adhesive system
Excellent resistance to heat, shrinking, abrasion and solvents
Clean removal, no residue

Masking 101 Helpful Hints:
Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts
Clean parts thoroughly before applying tape
Apply tape to dry surfaces only
Use paper or aluminum foil to cover a large surface area; tape edges down
Tape is for intermittent, one-time use only
Store rolls on end in a cool, dry place

1/4" BLUE TAPE

3/4" GREEN TAPE

1.25 X 1.531 X 1" LONG - STP-PLUG (5 COUNT)

V-HOOKS .044 X 4" (50-Count)

3/4" HIGH TEMP 2 MIL ORANGE TAPE 430F

S-HOOKS .180 X 8" (25-Count)