HIGH HEAT RESISTANT - FLAT BLACK MINI TEXTURE
*** High Heat Resistant Powder Coatings are Silicone base and are very heat sensitive, they need to stay below 85°F when in powder form. It's your responsibility to monitor your tracking to make sure your package doesn't sit at a hub or in a hot mailbox where the powder can start to cure and get ruined. We advise that you sift all High Temperature/Heat Resistant coatings through a standard flour sifter and any pieces that won't break down through the flour sifter must be discarded, all powder that goes through the sifter is fresh and ready to use.
Will withstand temperatures up to - 1200°F and sustain constant temperatures at 1,000°F
HIGH HEAT RESISTANT powders are ideal for BBQ’s, industrial heaters, chimney stacks, engine casings, engine manifolds, mufflers and light fixtures.
DESCRIPTION
This true high-temperature silicone system with a slight mini texture has a flat finish.
Was developed from a proprietary blend of resins and pigments to provide exceptional
service up to 1200°F (649°C). It is designed to be a flat fine textured coating for steel substrates.
Product Benefits
• Enhanced charging and handling characteristics
• Thinner film builds
• Provides excellent flow and leveling over a wide
range of film thickness
• Great performance at 1000°F (538°C)
• Excellent UV resistance for outdoor use
• Passed the full battery of corrosion performance
tests for automotive applications
• Designed to be more compatible and to reduce
cross contamination with other coatings
SPECIFICATIONS
Gloss Lvel - 0 - 9% Flat (low gloss)
Cure cycle - 20 minutes at 450°F
Specific Gravity - 1.73 +\-0.05
Theoretical coverage for 1 mil. - 112 ft² per pound
Film builds between. - 0.80 and 2.0 mils
Recommended at - 1.60 MILS (heavier film builds are not recommended.)
TYPICAL PROPERTIES
Adhesion(ASTM D3359) ............................................. 5B
Gloss at 60°(ASTM D523)...................................1.0 – 4.0
Impact Resistance(ASTM D2794-90)...............120D/60R
Pencil Hardness(ASTM D3363)................................ >2H
Humidity Resistance(ASTM D-1735).....1,000 hours pass
PERFORMANCE TESTING
Continuous testing at 1000°F (538°C) shows thIs product
retains gloss, color and physical integrity at this service
temperature. Testing indicates good film integrity after
limited exposure to temperature at 1400°F(760°C). This
formula has tested to the specifications of automotive and
other equipment manufacturers