1/2" Glass Cloth Tape, 500°F (Powder coating, blasting)
7 mil glass cloth tape with silicone adhesive is recommended for powder coating, grit/shot blasting, and thermal and plasma spray applications. It is resistant to high pressure blasting, abrasion, solvents, is flame retardant, and has excellent tensile strength.
- General Information:
- Total Thickness: 7 mil
- Temperature Range: -100°F to 500°F
- Typical Uses: Masking for thick powder coating, electrocoating, grit / shot blasting masking, thermal and plasma spray operations, other abrasive environments, solvents, and areas where flame retardant material is required.
- Features:
- 40 oz. / in. adhesion to steel
- 160 lbs / square in. tensile strength
- 4500 vots dielectric strength
- Adhesive: Silicone based, pressure-sensitive adhesive system
- Excellent resistance to heat, shrinking, abrasion and solvents
- Clean removal, no residue
- Helpful Hints:
- Push down hard! This is a pressure sensitive adhesive tape - pressure is required for it to adhere properly to parts
- Clean parts thoroughly before applying tape
- Apply tape to dry surfaces only
- Use paper or aluminum foil to cover a large surface area; tape edges down
- Tape is for intermittent, one-time use only
- Store rolls on end in a cool, dry place
