HIGH HEAT RESISTANT CHARCOAL METALLIC - Matte Finish - 1,200°F Temp Rating
A 1,200 degree rated high temperature resistant dark gray with an aluminum finish (Gunmetal). Excellent UV & chemical resistance for exterior or interior applications.
*** High Heat-Resistant Powder Coatings are silicone-based and must stay below 90°F in powder form. Monitor your tracking to ensure your package does not sit at a hub or hot mailbox, which can ruin the powder. If your powder was exposed to a higher temperature during transit and started to cure you can do the following - sift the High Temperature/Heat Resistant coating through a flour sifter; discard any pieces that won't break down. Powder that passes through the sifter is is good to use.
Will withstand temperatures up to - 1,492°F and sustain constant temperatures at 1,200°F
High Heat Resistant (High Temperature Rated) powders are ideal for BBQ’s, industrial heaters, chimney stacks, engine casings, engine manifolds, mufflers, light fixtures, or any application where you require a higher operating temperature
DESCRIPTION
A true high-temperature silicone system using a deep rich carbon black pigment, a slight mini texture finish, and a 15% gloss rating.
Developed from a proprietary blend of resins and pigments to provide exceptional service up to 1200°F (649°C).
Designed with a universal fine textured finish to hide imperfections & weld marks, making this an all-around resilient coating for multiple applications.
PRODUCT BENEFITS
• Enhanced charging and handling characteristics
• Thinner or Thicker film builds (universal)
• Provides excellent flow and leveling (wide range)
• Great sustained performance at 1,000°F (537°C)
• Excellent UV resistance for outdoor use.
• Passed the battery corrosion tests for automotive applications.
• Designed to be compatible, no cross contamination with other coatings.
SPECIFICATIONS
Gloss Level - 10 - 20% +/- Low Gloss (Matte Finish)
Cure Cycle - 15 minutes at 450°F
Specific Gravity - 1.40 +\-0.05
Theoretical coverage for 1 mil. - 137 ft² per pound
Film builds between. - 1.9 - 3.9 mils (recommended 2.0 - 3.0)
TYPICAL PROPERTIES
Adhesion(ASTM D3359) ............................................. 4B
Gloss at 60°(ASTM D523)............................10.0 – 20.0%
Impact Resistance(ASTM D2794-90).................80D/60R
Pencil Hardness(ASTM D3363)................................ >2H
Humidity Resistance(ASTM D-1735).....1,000 hours pass
Over Bake Resistance................................Time - >100%
PERFORMANCE TESTING
Continuous testing at 1,000°F (537°C) shows thIs product
retains gloss, color and physical integrity at this service
temperature. Testing indicates good film integrity after
limited exposure to temperature at 1,380°F(748°C). This
formula has tested to the specifications of automotive and
other equipment manufacturers
